Archive

Archive for the ‘New Product’ Category

Interference to your 5G services?

November 6th, 2019
Comments Off on Interference to your 5G services?


newBetter Data with our New Bandstop Filter

With more and more of our clients having problems with interference from different RF sources, this new filter helps prevent it.

Interference Prevention with Customisation

We can customise any Passband and Stopband for your case with 30 to 50 dB rejection suiting your needs.

This will improve voice and data significantly, bring more traffic, more revenue and happier customers in the network with improved LOYALTY!

Filter with DIN connectors

Filter with DIN connectors

Specifications
Passband MHz  1960-1980  2150-2170
Stopband MHz 1983.1~1990
Insertion loss dB <1.0 @ 1960 – 1979 MHz<1.7 @ 1979 – 1980 MHz<0.5 @ 2150 – 2170 MHz
Stopband Rejection dB >45 @ 1983.1~1990MHz
Return Loss  dB >15 @ 1960 – 1980 MHz>18 @ 2150 – 2170 MHz
IM3 dBc <-160 @ 2x40w carriers
Connector 7/16 DIN
Impedance Ω 50
Power dBm 50 Average Power54 Spontaneous Power

 


Compact 5G parts Solves Coverage Problems

November 5th, 2019
Comments Off on Compact 5G parts Solves Coverage Problems
Parts for 5G

Parts for 5G

Modern wireless communication systems, such as 5G, bring great challenges on radio frequency sub-systems, which should support multiple RF chains operating at different frequency bands and for various modes. MIMO antennas are key technology for 5G with tens or even hundreds of RF channels co-exist within a limited volume. The size of RF components are problematic issues, which play an important role in the overall behavior of wireless systems.

More new products http://buff.ly/2FuDKu3

#4G #5G #wireless #mobile #rf #radiofrequency #das #inbuilding #inbuildingwireless #inbuildingcoverage

New Equipment for 5G Networks

November 4th, 2019
Comments Off on New Equipment for 5G Networks

New and Improved – Latest RF Components

We are glad to share our latest products in Radio Frequency systems.

These new parts adds value to your 4G & 5G  Systems. In the photo are our new:

  • 3dB Hybrid Coupler
  • Attenuator
  • Termination Load
  • Circulator
High Power Splitters

High Power Splitters for 4G

Benefits & Application

These are vital components to be used with your Base Station, Node B, or BDA. They can be used with your passive, active or hybrid DAS.

These components offers good system isolation to avoid interference, together with low insertion loss they are your ideal selection to bring excellent voice quality and data throughput to your customers.

 

coupler / splitter

directional coupler and power splitter

LTE Bi-directional Log Periodic Antenna

January 15th, 2013
Comments Off on LTE Bi-directional Log Periodic Antenna

Latest in our LTE products family, it has:

  • High Gain
  • Low VSWR
  • Highly directional
  • Easy to Install
  • Lightweight

This antenna supports:

  • 700-960 / 1710—2700 wideband
  • LTE/GSM/CDMA/3G/WLAN/WiMax
  • 2 sectors coverage

4G Bidirectional Antenna

More LTE products please click HERE.

Invisible LTE Antenna for ALL frequencies

December 29th, 2011
Comments Off on Invisible LTE Antenna for ALL frequencies

Our Invisible Antenna  has recently been upgraded to cover all 4G/LTE frequencies, making it a truly global choice for all LTE systems.

Invisible LTE Antenna (datasheet)

Why is it Invisible ?

Our invisible antenna is one of our best selling items. This is mounted from above the false ceiling and only the ‘smoke detector’ shape is seen by the users. Making the antenna invisible

How does it help Data service for 3G / 4G?

This actually allows you to have the dipole below the ceiling for maximum Data performance, while it is so low profile that does not make users think that there is an antenna. Since the dipole is below ceiling, it will not be blocked by builder materials. These materials are often made of metal which reduces available radio signal strength and caused reflection and difraction. By using the Invisible Antenna, the maximum Signal to Noise Ratio and Signal Strength are acieved to allow best  Voice Quality and Data Throughput.

Why is the Invisible Antenna best for 3G / 4G?

We have now upgraded this Invisible Antenna to support 700 MHz to 6000 MHz, covering the 4G / LTE frequencies. By using this antenna, the building is future proof. If an upgrade is required you are ensured that the antenna can continue be used to support the next technology.

More details here (more LTE antenna / parts)

4G LTE 6 way Power Divider gives you 6 antenna instead of 1

May 4th, 2011
Comments Off on 4G LTE 6 way Power Divider gives you 6 antenna instead of 1

6 way LTE splitters

6 way LTE splitters

To further empower Antenna System designs, we offer this Power Divider to split RF power into 6 ways for 6 different antenna, to improve the overall cost effectiveness of the DAS.

Type Microstrip
Type 2 way

KP-M0727-2

3 way

KP-M0727-3

4 way

KP-M0727-4

6 way

KP-M0727-6

Loss ≤3.5dB ≤5.5dB ≤6.6dB ≤9.5dB
Dimension mm 76 x 38 x 20 72 x 72 x 23 72 x 72 x 23 150 x 95 x 20
Working Frequency 700-2700MHz 700-2700MHz 700-2700MHz 800-2700MHz
Port Isolation dB 20 20 20 16
Ripple ≤1 dB
Impedance 50Ω
VSWR ≤1.35
IM3 ≤-110dbc (+43dBm x 2)
Power 50W 50W 50W 20W
Connector N female
Working temp. -40~+60℃

4G LTE Adjustable Attenuator

May 2nd, 2011
Comments Off on 4G LTE Adjustable Attenuator

We are proud to announce our enhanced product. This 4G LTE Adjustable Attenuator offers contiguous attenuation of 1 to 20dB in any steps. Power rating is 2W.

Adjustment is by means of a turnable screw in log scale and is so easy to use on site or in a lab environment.

Ideal for any RF engineer. Get it into your gears today!

Adjustable Attenuator

Adjustable Attenuator

Categories: 4G, Filters, New Product, Product Tags:

DragnTECH Solutions for 4G LTE

May 19th, 2010
Comments Off on DragnTECH Solutions for 4G LTE

LTE 4G Antenna

64 Network Operators Have Committed to LTE in 31 Countries

China Telecom, China Mobile and its subsidary CM Peoples have announced their committment to LTE. This will mean that LTE will be the de facto standard for wireless high speed data in the region. LTE is the natural migration choice for GSM/HSPA operators and is the main direction for the industry. LTE is also the next generation mobile broadband system of choice of leading CDMA operators.

DragonTECH is LTE Ready. We have a fully developed range of products and solutions.

4G Cavity Power Divider

4G Directional Coupler

4G LTE Diplexer

4G LTE Quadplexer

4G Microstrip Power Divider

4G Omni Antenna DTQI0727-3A

4G Omni Antenna DTQJ0727-FS

This list is not exhaustive, we are happy to learn your specific requirements. Contact us.

PicoDAS 2.0

April 6th, 2010
Comments Off on PicoDAS 2.0

IMG_9344We never stop with innovations! Our new PicoDAS is out with:

  • Upto 3 band support simultaneously
  • Any Band GSM/DCS/UMTS/CDMA/WCDMA/Tetra/iDEN
  • Built-in Service antenna

So, please check out our TriBand PicoDAS 2.0

New Dual Band / Triband SES

August 14th, 2009
Comments Off on New Dual Band / Triband SES

We introduced our Smart Elevator Solution a few days ago.

Readers customers keep flooding emails in asking for dual band and triband versions. To save more people writing, here it is:

Dual band and Triband SES

Dual band and Triband SES

This unit maintains performance with improved appearance.

It is compact and uses external donor and service antenna.

As before, customers can speify the bands and we will customise them.

Powered by eShop v.3